New Holland C190 trackskid steer
Approx 2005 model heavy duty machine with lots of digging and lifting power. Has the 2 speed option. 18\" tracksin decent condition with normal wear and tear. A new 84\" bucket was put on this machine when we got it. We used it 40 hours or so with no problems other then a small hydraulic hose. Machine is in the shop now to have the hose repaired. Labels on the boom are peeling. We have a new boom decal set here that will be sent with the machine if buyer wants them
Machine is ready to put to work
please email or call 717-617-7478if questions. Machine specs below
C190
Dimensions
Length with bucket down, in. (mm)
148.5 (3770)
Width w/bucket, in. (mm)
84 (2130)
Height to top of cab, in. (mm)
79.6 (2020)
Ground clearance, in. (mm)
10.1 (260)Drive Train
Max travel speed- forward, mph (kph)
8 (12.9)
Width over tracks, in. (mm)
82.4 (2090)
Track width, in. (mm)
17.7 (450)Engine
Make and model
New Holland 445/M2
Fuel
Diesel
Gross power @ RPM, hp (kW)
80 (60) @ 2300
Net power @ RPM, hp (kW)
74 (55) @ 2300
Peak torque, lb.-ft. (N-m) @ RPM
236 (320) @ 1400
Number of cylinders
4
Displacement, cu. in. (l)
274 (4.5)
Aspiration
Natural
Cooling with 84\" dirt and foundry bucket and 17.7\" wide track belt widthHydraulics
System type
Open
Main pump type
Gear
Total flow, gpm (l/min)
21.9 (82.9)
Main relief pressure, psi (bar)
3,050 (210)
Optional high flow, gpm (l/min)
37.3 (141.2)Operating Weights
Operating weight, lbs. (kg)
9,811 (4450)Other Features
Standard ROPS
Tilt forward
Self leveling bucket
Performance Loader Arms
Linkage geometry
Vertical lift
Rated operating load (35% of tipping load), lbs. (kg)
2,900 (1316)
Straight tipping load, lbs. (kg)
8,286 (3759)
Bucket breakout force, lbs. (kg)
7,670 (3479)
Max dump angle at full height, degrees
45
Dump clearance at full height discharge, in. (mm)
101.9 (2590)
Dump reach at full height discharge, in. (mm)
32 (810)
Max hinge pin height, in. (mm)
125.6 (3190)
Bucket rollback at carry position, degrees
37Service Capacities
Fuel tank, gal. (l)
21.5 (81)
Cooling system, gal. (l)
4.5 (17)
Hydraulic system total, gal. (l)
15 (57)
Local pick up is fine or I can arrange trucking if needed. If within several hundred miles freight cost is $2.50 per loaded mile. If long distance the mileage charge is less...if you want a shipping quote please email zip code
You\'re welcome to come inspect, run and operate this machine if you like. Skid steer runs and operates fine but is used equipment and sold as listed, as is condition
PLEASE DON\'T offer ON THIS ITEM IF YOU\'RE NOT SERIOUS ABOUT PURCHASING! Thanks!PA residents add 6% sales tax or if for business or farm use that is exempt need to sign a tax exemption form. Out of state buyersalso need to pay taxif items are picked up in state (unless exempt), but not required to pay taxifitem shippedoutside of PA
Narvon is located is southeastern PA (between Harrisburg & Philadelphia)