FREE SHIPPING TO YOUR LOCATION INCLUDED! No Hidden Charges! (If you need liftgate delivery, please tell us so we can set that up before shipping, no charge for it but we must know)

This Listing is for a:

BRAND NEW PM-727-MVertical Bench Type Milling Machine with chip tray and Stand as shown.

(You are offerding on a brand new machine in the crate, the one in the pictures was just set up for pictures)

6 Speed Geared Head, with all Hardened and Ground Steel Gears forreliability!

This machine uses 120V Standard Power!

Here are some features of this milling machine:

1. Hardended and Ground Steel Gears in head for much heavier cutting capacity compared with plastic gear equipped models
2. Compact size for smaller workshops, but has more power to remove material when needed
3. Table graduations in .001\" on X and Y with a true inch pitch
4. Main column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range
5. Only requires 120 volt single phase circuit so it can be set up virtually anywhere, without needing additional circuits installed in your workshop

PLUS IT INCLUDES A 3 YEAR WARRANTY!

Main Features:
Compact, Accurate, Economical Machine.Great for those who are looking for a
compact machine for a smaller work shop, yet need the ability to take heavier cuts
compared withother machines in this size range
• Spindle is Supported by High Precision Tapered Roller Bearings
• Mill Head May be Tilted ±90° (both left and right)
• Precision Manual Fine Down Feedis standard
• Adjustable Tapered Gibsfor longer life
• Positive Locksare standardfor Table, Head, Quill,andColumn
• Easy Reading Dials Have Satin Chrome Finish, Graduated in .001\"
• Quill DRO is Standard, Accuracy of the Display 0.0005”, Selectable from
mm/inch

• Generous 18-1/4\" Spindle To Table Max Distance for taller work
  
• 8-1/2\" Y Axis Travel, More than other machines in this class

Fast delivery times,these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.

DON\'T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4\" VISES, AND CLAMP KITS!

Shipping is FREE for this machine any where in the 48 continental states, or you can pick up at our location and we can load you for free.

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don\'t have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

• Model No. PM-727M(AC120V
  Motor, Geared Head)
  
• Max. Drilling Capacity 1-1/4\"
  
• Max. End Milling Capacity 1\"
  
• Max. Face Milling Capacity 3\"
  
• Table Size 27-1/2\" x 7-1/4
  
• Cross Travel 8-1/2\"
  
• Longitudinal Travel 15\"
  
• Vertical Travel 16\"
  
• Max Distance Spindle To Table 18-1/4\"
  
• Taper of SpindleR-8
  
• Spindle Travel 3\"
  
• T Slot Size 7/16\"
  
• Range of Spindle Speeds 115-1700 RPM
  
• Headstock Tilt Left & Right ±90°
  
• Motor 1 HP
  
• Net Weight (Not Including Base) 475LBS
  
• Net Weight (With Base) 575LBS
  
• Power Requirements 120V, 10 Amps
  
• Dimensions (Assembled) 39\"W x 78\"H x 30\"D

We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-727-M & PM-727 Base