This Listing is for a:

BRAND NEW MODEL PM-932MVertical Bench Type Milling Machine with 3-AXIS DIGITAL READOUT INSTALLED

With Electric Motor for Head Positioning, (No more cranking the head up and down by hand!) and X Axis Table Power Feed Included - BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES

Here are some features of this milling machine:

1. Comes StandardwithQuill Depth DRO, R8 Spindle Taper,different packages available to meet user\'s
2. Class 5 high precision spindle bearings
   
3. Generous table size and travel in a compact machine
   
4. Solid Dovetail Way Column for high rigidity and precise up and downmovements
   
5. Easy speed changes, no need to open any covers and change belts,just stop, flip a lever, and go.
   
6. Very Solid cast iron head and body make deeper cuts no problem
   
7. Head tilts 90 degrees left and right for angled cutting
   
8. Oil Filled gearbox in head for long life
   
9. All SteelGears in head for long life, NO PLASTIC GEARS
   
10. Adjustable tapered gibs and backlash to keep the machine tight andaccurate
    
11. 3Year Warranty(Longest warranty out there on this type of machine)
12. Precision Matthews 3-Axis Digital Readout

PLUS INCLUDES A 3 YEAR WARRANTY!

So with this machine, you will receive:

1. PM-932M Milling Machine (220V, Single Phase Power)
2. Z Axis / Head Electric Motor for head positioning
3. X Axis Table Power Feed
4. Quill DRO is built in
5. Cast Iron Stand/Base as pictured
6. Precision Matthews 3-axis Digital Readout

Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.

Shipping is $249 for this machine, or you can pick up at our location at no extra charge, and we can load you for free. IF YOU NEED LIFT GATE FOR DELIVERY please put it in the notes when you order. No extra charge for lift gate delivery, we just need to know to ship it with that.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don\'t have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Main Specifications:

• Table Size: 9\"x31.5\"
  

• Max. Table Load Capacity: 300lbs
  

• Table T-Slot Size and Number:14mm /9/16\", 3 Slots
  

• Table Travel, X Axis: 22-3/8\" Hand Only,19.5\"w/Power Feed
  

• Table Surface Height from floor,34-3/4\" (With base flat onfloor)

• Base Dimension at floorapprox. 18-5/8\"W x 27\"D
  

• Normal Working Max Height: (top of column travel motor)76-1/2\"
  

• Height with head all the way up: (top of main motor)81-1/2\"
  

• Stand (Base) height, to machine mounting surface:24\"
  

• Cross Travel, Y Axis:8\"
  

• Head Vertical Travel:17\"
  

• Max. Distance Spindle to Table: 18\"
  

• Quill (Spindle) Travel: 5\"
  

• Lead Screw Type:Inch PitchAcme Threads
  

• Spindle Taper: R-8, with 7/16-20 drawbar thread (U.S.
  
• Quill Diameter:approx.3\"

• Head TiltFront to Back:N/A
  

• Head Swivel: Side To Side, 90 Degrees
  

• Ram Swivel: N/A
  

• Power:220 Volt,SinglePhase,9 Amps
  

• Motor Horsepower:1.5H.P.(Some other similar machines will say
  that they are 2HP, but its the SAME exact motor as this one, just rounded
  up to 2hp and marked that way, we prefer to be honest and mark it as
  what it really is, which is 1.5HP,which ismore than enough power for
  thismachine either way)
  

• Casting Type:Fine Grain Cast Iron
  

• Approximate Weight: 1100lbswith Base, 850 Without Base

We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-932M w/PM-3ax &PM-932M-CASTSTAND