SIMPSON STEEL BUILDINGCOMPANY

BUILDING DETAILS:

• -Design:Steel Truss Design
• -Size: 50’Wide 100’ Long 16’ Tall
• -Ground SnowLoad: 20 lbs per sq. ft.
• -WindLoad: 105 MPH
• -Exposure: C
• -RoofPitch: 3:12

LOADS CAN BE ADJUSTEDTO MEET LOCAL CODE REQUIREMENTS (May require additional costs): Simpson Steel Truss buildings are designed tosatisfy all building code requirements.If required for obtaining a Building Permit, the appropriate state engineer’s stamp and letter of designationcertification are available for all 50 states and Canada. Check with your local building inspector orpermit authority for specific requirements.If building permit is required, it should be obtained prior tofabrication. If a building permit isrequired you will most likely need stamped engineered drawings from us at anadditional charge. Fabrication shouldnot begin until you obtain the permit.

BASE PACKAGE:

• -All buildings come complete with an erection manual, easy to read drawings, andAnchor Bolt Plans
• -Customdesigned around your door and window size and location requirements (doors and windows not included)
• -Included in pricing are 1 walk door opening, andall overhead door openings, these include all framing and trim (doors notincluded). Accessories (Walk doors –Windows – Insulation, etc.) are available.
• -Your choice of color (13 available members are high strength 57,000 psi steel, cut to length, andpre-punched for easy assembly with either 1/2” bolts or self-drilling screws.Bolts and screws for the framework are supplied by us.
• -Roofingpanels are 26ga. 80,000 psi Galvalume+, which is a superior roofing productused throughout the metal building industry.It is comprised of an acrylic coating applied over the top of an alreadygalvalume steel panel. It has a shinyaluminum appearance. Painted roof panelsare available at an additional cost
• -Wallpanels are 26ga. 80,000 psi galvalume steel. They are comprised of a modified siliconepolyester paint applied over the top of already galvalume steel panels. There are 13 standard colors.
• -All roof and wall panels are attached withself-drilling fasteners. Wall panelfasteners are color matched. All panellaps are fastened with self-drilling fasteners.Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a dieformed foam closure to “bird-proof” the building, sealing off all openings.
• -All buildings come completely trimmed out incolor. Sculptured gable, eave, cornerand base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels.

DELIVERY DETAILS:

-Typically your building can be delivered within3 to 4 weeks from the time that you give us the authorization to proceed withfabrication.

-Shipping isincluded to MOST STATES in the U.S. Some additional freight may be addedfor the far West, Northwest, North, and Northeast. Please provide city, state and zip code during inquiry to confirm.

EXTRA FEATURES ANDAVAILABLE OPTIONS:

• -3” or 6” Insulation
• -Gutters & Downspouts
• -Colored Roof
• -4’ Wainscot
• -Expandable Endwall
• -18” Overhang (1 end or both)
• -18” Overhang (1 side or both)
• -7’ Liner Panel
• -Base Girt
• -Lean-to
• -Engineer Stamp on Drawings
• -Engineer Stamped Design Calculations
• -Foundation Plans
• -3’x7’ Door
• -3’x7’ Half Glass Door (Glass not included)
• -3’x7’ Slimline Glass Door (Glass not included)
• -3’x3’ Horizontal Sliding Window
• -6’x3’ Horizontal Sliding Window
• -3’x3’ Vertical Sliding Window
• -3’x4’ Vertical Sliding Window
• -Light Transmitting Panel

WHY SIMPSON STEELTRUSS?

We would like to take this opportunity to thank you for yourinterest in the pre-engineered steel building industry, and particularly foryour interest in our company.

Simpson Steel has been a manufacturer of high quality,pre-engineered steel buildings since 1980.Our product line ranges from the most basic of structures, to thehighest degree of design complexity. Inaddition to our line of Steel Truss buildings, Simpson Steel manufactures avariety of other structures. (Recreational, warehousing, mini-storage, airplanehanger, and shopping mall structures.)

In 1993, Gregg Simpson developed and patented a steel trussdesign to compete with the wooden structured pole barns. The steel truss is shaped much like a woodentruss with a bottom chord. The mainexception is, that all of the members of the truss are steel. Designed to carry the same snow loads asseveral wooden trusses, the steel trusses can be spaced as much as 20’ apart.

All other Framing on these buildings is the same as anyother larger industrial/commercial building we do. From the outside they look the same, the onlydifference being the truss itself. Thetruss takes the place of a welded up I-Beam frame.

The truss comes “knocked down” and is easily assembled onthe ground. The members bolt to 3/16”thick steel gusset plates.

ADVANTAGES:

-Cost: Minimal compared to welded up I-Beam or RigidFrames

-Strength: Engineered to exceed your local designrequirements for snow, wind and seismic loads.Stamped engineered drawings available for all states.

-Shipping: Materials nest together for economicalshipping plus we ship from over 15 plants nationwide making freight cost lowerand we typically include the freight.

-Accessories: Complete line of accessories andoptions. Doors – Windows – Insulation –Overhang – Wainscot – Etc.