You are viewing a great vintage K&D clock bushing press machine repair tool for repairing worn pivot holes. With this tool you can repair (with ease) your worn mechanisms and or repair & satisfy your customers. The shaft has KWM style reamers that are held in place with a pin. Inner diameter is 4mm +/- 0.1mm. Press comes with fully functional 7 stumps (one adjustable) to fit the \"anvil\"; one center finder; 5 bushing pushers and 4 reamers with a following diameter in millimeters 1.76; 2.67; 3.47; 5.85. The tool used sparingly and still in good shape, and the movement holding clamps work well. There are 4 knobs on each side. One to adjust position of the clamps up, down and turn CW or CCW, one to adjust the clamps left and right and two to clamp the plates. The anvil holder is 9.95 mm in diameter and 57 mm deep. It will holds a Bergeon anvil nicely. For shipping I will disassemble it to protect the parts. The tools is heavy, and weighs over 11 pounds so shipping is costly.
Please look at the pictures and ask any questions before offerding.Thanks for viewing

---