TOP GRAPPLES FROM THE GRAPPLE RAKE EXPERTSFAVER MODEL 105-9-X3
SEVERE DUTY GRAPPLE ROOT RAKE BUCKET FOR WHEEL, TRACTOR AND BACKHOE LOADERS.

• Faver 105-9-X3 Grapple Rake
• 105\" Raking Width, 69\" Opening, 3300 lbs.
  
• Rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 1.5\" thick.
  
• Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking.
  
• The main cross beam utilizes an extra heavy 6\" x 6\" x 1/2\" wall square tube.
  
• Clamping performance is maximized using 3000 p.s.i. cylinders boasting a 5\" bore x 12\" stroke.
  
• 2.25\" diameter cylinder rods prevent bending under severe loads.
  
• The claw structures are strengthened greatly by directing the cylinder rods directly into the main cross members, providing ultimate support for even the toughest abuse.
  
• Cylinders are covered with solid clamp style covers, cut from solid plate and built to endure severe pounding.
  
• Grapple claws are purposely designed to clamp down extremely hard in all positions.
  
• The bottom rake tines were designed to rake both going forward and in reverse.
• From the ground up, Faver grapple rakes are built to give ultimate performance in highly abusive applications.
• Please note that the listed price does not include the loader mount, mounts are quoted separate.

Please call with questions, current availability and lead time: 888-54-FAVER
Shipping quoted separate, call for free quote: 419-345-3966
For more online information visit: www.faverinc.comFAVER - High Performance Equipment You Can Depend On

See Our store For All Models: Faver Grapple Rakes

Please Visit Our Website: www.faverinc.com

---